PEMCO, or PE Manufacturing, is a small, privately held, manufacturing firm located in St. Petersburg, FL dedicated to producing top of the line surge protection products. PEMCO's surge arresters are designed for a wide variety of applications. Both hard-wire and plug-in styles are available. Products can be custom designed and manufactured to meet a client's unique specifications. All of the PEMCO surge arresters are rigorously tested in the on-site 100,000 Amp surge generation lab in order to verify their protection capabilities. At PEMCO, we make sure it works!
The VSS-20 is specially designed for the cable industry to protect remote power supply cabinets used in the field. It has been field tested in over 2000 locations in one Florida county alone and has resulted in a 75-90% decrease in the number of repair calls for cable outages. It successfully protects sensitive equipment from surges, line drops and power disturbances that might otherwise knock the power supply equipment offline. Available in a variety of configurations, plug styles and cord lengths, it can easily be made to your unique specifications.
For more information, please visit vss-20.com.
EXT50C UPS Hard-wire Suppressor
The EXT50C is a compact, state of the art surge protection system. This is a universal voltage unit that fits any electrical service up to 277/480. Its compact size saves valuable electrical room space. Plus it can be installed in most retro-fit situations. Available with a surge rating of 50kA, the EXT50C is listed to UL 1449 Edition 3. The EXT50C is listed as a TYPE 1 device which means it can be installed upstream or downstream of the service main disconnect. Can be installed in services up to 200,000 Amps fault current. The EXT50C features exclusive multi-path technology that provides redundant surge elements that continue to provide protection should an internal surge element fail. The unit includes intelligent indicators for each protection mode. You can confirm total protection with a quick inspection.
Click here for the EXT50C Product Sheet.
EXT100M UPS Hard-wire Suppressor
The EXT100M is a state of the art surge suppression system designed for 100kVA protection. This is a universal voltage unit that fits any electrical service up to 277/480V. The EXT100M is rated as a TYPE 1 device and can be installed upstream or downstream of the service main disconnect. It is "modular" and "hot swappable" meaning that the surge modules can be replaced without removing the suppressor. The EXT100M is listed to UL 1449 Edition 3. Can be installed in services up to 200,000 Amps fault current. The unit features exclusive multi-path technology that provides redundant surge elements that continue to provide protection should an internal surge element fail. The unit includes intelligent indicators for each protection mode. You can confirm total protection with a quick inspection. Additionally, the EXT100M provides dry contacts for optional remote monitoring.
Click here for the EXT100M Product Sheet.
SS400HW Single Phase Hard-wire Suppressor
The SS400HW is a rugged, highly reliable panel surge protector for residential or commercial standard 120/240V single or split phase applications. The SS400 features totally solid state construction for reliability and quick response to surges. Two advanced, commercial grade metal oxide varistors (MOVs) are the primary protective elements. These MOVs are each capable of handling 40,000Amps of surge current. The protection components are designed to fail shorted and are fused. After a typical surge, the suppressor automatically recovers and is ready for the next surge. In a rare event of MOV failure, the fuse opens and the indicator LED extinguishes. The SS400 is listed as a TYPE 1 SPD to UL 1449 edition 3. The SS400 is rated for installation on electrical services either before or after the main disconnect panel. It is internally fused and does not need external fuses or breakers. Can be installed in services up to 200,000 Amps fault current.
Click here for the SS400HW Product Sheet.
CSS Series Compact Surge Arrester
The CSS series compact suppressor is designed to protect 120 Volt electronics with up to 15 amps current carrying capability. The CSS series is a single stage, single receptacle suppressor that plugs into a standard wall outlet. It is available with as a stand alone single outlet suppressor, or with the addition of either a telephone line suppressor, or a video line suppressor included. Each unit features a smart indicator light that verifies the surge protection is fully functional.
Click here for the CSS Product Sheet.
US1206 Universal Plug-In suppressor
The US1206 plug-in suppressor offers six rotating power receptacles, two video line suppressors, two phone line suppressors, and 1 data line suppressor. Since surges can travel over many different electrical paths to get to your sensitive equipment, it is designed to protect all incoming circuits. Its circuitry absorbs and reroutes to ground and surge energy, or in the event of a catastrophic surge, completely disconnects the power. The receptacles rotate so that the cords are out of the way for installations behind desks and other furniture. The US1206 provides intelligent indicators to diagnose proper grounding and outlet wiring. The multi-stage protection handles six times the surge energy while still protecting your sensitive electronics. Let-through voltage is the best on the market, even at a full 3,000 AMPs surge current.
Click here for the US1206 Product Sheet.
PM-850 Battery Back-up
The PM-850 provides AVR (Automatic Voltage Regulation) stabilization for input voltages in order to achieve optimal equipment performance by completely eliminating brownouts and overvoltages. This smart unit provides battery back-up to 5 outlets and surge protection to an additional 4 outlets that do not require constant power. With a set of in/out co-axial plugs as well as a set of combo telephone/LAN connect plugs, you can be assured of complete coverage to all connected equipment. Also offers a USB/Serial connection to a connected PC for device and power quality monitoring.
LCD display shows 7 different screens including input voltage, output voltage, AVR status meter, battery capacity, estimate runtime and load level. Unit provides up to 120 minutes of runtime during a power outage.
Click here for the PM-850 Product Sheet.
SpaceSaver SS320A Meter Arrester
The SpaceSaver 320A compact Meter arreter is your first line of defense against incoming surges. The SS320A is a thin, low profile meter socket surge arrester suitable for both 200 Amp and 320 Amp meter enclosures. The SS320 protects electric circuits and large "non-electric" appliances. The unit contains quality TVSS circuitry that provides reliable performance at up to 45,000 Amp surges. It withstands multiple surges and has an expected 20year life. The SS320A includes a thermal disconnect on each phase, and internal shield for safe installation and an operational indicator that verifies the SS320 surge protection is functional.
Click here for the SS320A Product Sheet.
MPA Series 240 Volt Arrester
The MPA Series High Energy, low voltage surge arresters are designed to provide quality surge protection at severe surge locations such as the electrical meter, the service entrance, well pumps, compressors, building lighting, and other non-electronic sevices. The MPA Series is designed as a distribution class arrester and has successfully passed all design tests per ANSI/IEEE C62.11. Accordingly, the MPA Series can be used as a secondary arrester.
The MPS Series of arresters incorporates the highest energy handling Metal Oxide Varistors (MOV's) available in the industry. This superior energy handling ability assures long service life. These arresters were designed with a full 40k A surge withstand capability. The durable MOV's used in the series are manufactured in the U.S. at an ISO-9001 certified plant.
Click here for the MPA 240V Arrester Product Sheet.
Can't find what you are looking for?
1-800-862-4377 or Contact us at firstname.lastname@example.org